dmesg - Intel Core i3-8100T - Intel UHD 630 CFL GT2 3GB -
microcode: microcode updated early to revision 0xea, date = 2021-01-05
Linux version 5.11.0-27-generic (buildd@lcy01-amd64-019) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #29~20.04.1-Ubuntu SMP Wed Aug 11 15:58:17 UTC 2021 (Ubuntu 5.11.0-27.29~20.04.1-generic 5.11.22)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000088bedfff] usable
BIOS-e820: [mem 0x0000000088bee000-0x000000008b5f8fff] reserved
BIOS-e820: [mem 0x000000008b5f9000-0x000000008b69efff] ACPI data
BIOS-e820: [mem 0x000000008b69f000-0x000000008baeafff] ACPI NVS
BIOS-e820: [mem 0x000000008baeb000-0x000000008c20dfff] reserved
BIOS-e820: [mem 0x000000008c20e000-0x000000008c20efff] usable
BIOS-e820: [mem 0x000000008c20f000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000016dffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.70 by American Megatrends
efi: ACPI 2.0=0x8b61a000 ACPI=0x8b61a000 TPMFinalLog=0x8ba93000 SMBIOS=0x8bf87000 SMBIOS 3.0=0x8bf86000 MEMATTR=0x84a35018 ESRT=0x87284318 MOKvar=0x84a38000 RNG=0x8bfb2f98 TPMEventLog=0x7fd4d018
efi: seeding entropy pool
random: fast init done
secureboot: Secure boot disabled
SMBIOS 3.2.1 present.
DMI: LENOVO 10US00DSIX/313D, BIOS M20KT40A 06/27/2019
tsc: Detected 3100.000 MHz processor
tsc: Detected 3099.999 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x16e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7FF0000000 write-back
1 base 008D800000 mask 7FFF800000 uncachable
2 base 008E000000 mask 7FFE000000 uncachable
3 base 0000000000 mask 7F80000000 write-back
4 base 0100000000 mask 7F00000000 write-back
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 6360M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 5 lose cover RAM: 0G
e820: update [mem 0x8d800000-0xffffffff] usable ==> reserved
last_pfn = 0x8c20f max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x0000000087284318 to 0x0000000087284378.
e820: update [mem 0x87284000-0x87284fff] usable ==> reserved
e820: update [mem 0x84a38000-0x84a38fff] usable ==> reserved
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x3cd6b000-0x3fffdfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000008B61A000 000024 (v02 LENOVO)
ACPI: XSDT 0x000000008B61A0B0 0000E4 (v01 LENOVO TC-M20 00001280 AMI 00010013)
ACPI: FACP 0x000000008B65B0C0 000114 (v06 LENOVO TC-M20 00001280 AMI 00010013)
ACPI: DSDT 0x000000008B61A228 040E96 (v02 LENOVO TC-M20 00001280 INTL 20160527)
ACPI: FACS 0x000000008BAE8080 000040
ACPI: APIC 0x000000008B65B1D8 000084 (v04 LENOVO TC-M20 00001280 AMI 00010013)
ACPI: FPDT 0x000000008B65B260 000044 (v01 LENOVO TC-M20 00001280 AMI 00010013)
ACPI: FIDT 0x000000008B65B2A8 00009C (v01 LENOVO TC-M20 00001280 AMI 00010013)
ACPI: MCFG 0x000000008B65B348 00003C (v01 LENOVO TC-M20 00001280 MSFT 00000097)
ACPI: SSDT 0x000000008B65B388 001B1C (v02 LENOVO TC-M20 00001280 INTL 20160527)
ACPI: MSDM 0x000000008B65CEA8 000055 (v03 LENOVO TC-M20 00001280 AMI 00010013)
ACPI: SSDT 0x000000008B65CF00 0031C6 (v02 LENOVO TC-M20 00001280 INTL 20160527)
ACPI: HPET 0x000000008B6600C8 000038 (v01 LENOVO TC-M20 00001280 01000013)
ACPI: SSDT 0x000000008B660100 001C01 (v02 LENOVO TC-M20 00001280 INTL 20160527)
ACPI: SSDT 0x000000008B661D08 000FAE (v02 LENOVO TC-M20 00001280 INTL 20160527)
ACPI: SSDT 0x000000008B662CB8 003023 (v02 LENOVO TC-M20 00001280 INTL 20160527)
ACPI: UEFI 0x000000008B665CE0 000042 (v01 LENOVO TC-M20 00001280 01000013)
ACPI: LPIT 0x000000008B665D28 000094 (v01 LENOVO TC-M20 00001280 01000013)
ACPI: SSDT 0x000000008B665DC0 0027DE (v02 LENOVO TC-M20 00001280 INTL 20160527)
ACPI: SSDT 0x000000008B6685A0 0014E2 (v02 LENOVO TC-M20 00001280 INTL 20160527)
ACPI: DBGP 0x000000008B669A88 000034 (v01 LENOVO TC-M20 00001280 01000013)
ACPI: DBG2 0x000000008B669AC0 000054 (v00 LENOVO TC-M20 00001280 01000013)
ACPI: DMAR 0x000000008B669B18 0000A8 (v01 LENOVO TC-M20 00001280 01000013)
ACPI: SSDT 0x000000008B669BC0 000144 (v02 LENOVO TC-M20 00001280 INTL 20160527)
ACPI: BGRT 0x000000008B669D08 000038 (v01 LENOVO TC-M20 00001280 AMI 00010013)
ACPI: TPM2 0x000000008B669D40 000034 (v04 LENOVO TC-M20 00001280 AMI 00000000)
ACPI: LUFT 0x000000008B669D78 0349E2 (v01 LENOVO TC-M20 00001280 AMI 00010013)
ACPI: WSMT 0x000000008B69E760 000028 (v01 LENOVO TC-M20 00001280 AMI 00010013)
ACPI: Reserving FACP table memory at [mem 0x8b65b0c0-0x8b65b1d3]
ACPI: Reserving DSDT table memory at [mem 0x8b61a228-0x8b65b0bd]
ACPI: Reserving FACS table memory at [mem 0x8bae8080-0x8bae80bf]
ACPI: Reserving APIC table memory at [mem 0x8b65b1d8-0x8b65b25b]
ACPI: Reserving FPDT table memory at [mem 0x8b65b260-0x8b65b2a3]
ACPI: Reserving FIDT table memory at [mem 0x8b65b2a8-0x8b65b343]
ACPI: Reserving MCFG table memory at [mem 0x8b65b348-0x8b65b383]
ACPI: Reserving SSDT table memory at [mem 0x8b65b388-0x8b65cea3]
ACPI: Reserving MSDM table memory at [mem 0x8b65cea8-0x8b65cefc]
ACPI: Reserving SSDT table memory at [mem 0x8b65cf00-0x8b6600c5]
ACPI: Reserving HPET table memory at [mem 0x8b6600c8-0x8b6600ff]
ACPI: Reserving SSDT table memory at [mem 0x8b660100-0x8b661d00]
ACPI: Reserving SSDT table memory at [mem 0x8b661d08-0x8b662cb5]
ACPI: Reserving SSDT table memory at [mem 0x8b662cb8-0x8b665cda]
ACPI: Reserving UEFI table memory at [mem 0x8b665ce0-0x8b665d21]
ACPI: Reserving LPIT table memory at [mem 0x8b665d28-0x8b665dbb]
ACPI: Reserving SSDT table memory at [mem 0x8b665dc0-0x8b66859d]
ACPI: Reserving SSDT table memory at [mem 0x8b6685a0-0x8b669a81]
ACPI: Reserving DBGP table memory at [mem 0x8b669a88-0x8b669abb]
ACPI: Reserving DBG2 table memory at [mem 0x8b669ac0-0x8b669b13]
ACPI: Reserving DMAR table memory at [mem 0x8b669b18-0x8b669bbf]
ACPI: Reserving SSDT table memory at [mem 0x8b669bc0-0x8b669d03]
ACPI: Reserving BGRT table memory at [mem 0x8b669d08-0x8b669d3f]
ACPI: Reserving TPM2 table memory at [mem 0x8b669d40-0x8b669d73]
ACPI: Reserving LUFT table memory at [mem 0x8b669d78-0x8b69e759]
ACPI: Reserving WSMT table memory at [mem 0x8b69e760-0x8b69e787]
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000016dffffff]
NODE_DATA(0) allocated [mem 0x16dfd6000-0x16dffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000016dffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x0000000088bedfff]
node 0: [mem 0x000000008c20e000-0x000000008c20efff]
node 0: [mem 0x0000000100000000-0x000000016dffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000016dffffff]
On node 0 totalpages: 1010573
DMA zone: 64 pages used for memmap
DMA zone: 279 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA zone: 28770 pages in unavailable ranges
DMA32 zone: 8688 pages used for memmap
DMA32 zone: 556015 pages, LIFO batch:63
DMA32 zone: 29713 pages in unavailable ranges
Normal zone: 7040 pages used for memmap
Normal zone: 450560 pages, LIFO batch:63
Normal zone: 8192 pages in unavailable ranges
Reserving Intel graphics memory at [mem 0x8e000000-0x8fffffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
e820: update [mem 0x84f32000-0x85025fff] usable ==> reserved
TSC deadline timer available
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x84a38000-0x84a38fff]
PM: hibernation: Registered nosave memory: [mem 0x84f32000-0x85025fff]
PM: hibernation: Registered nosave memory: [mem 0x87284000-0x87284fff]
PM: hibernation: Registered nosave memory: [mem 0x88bee000-0x8b5f8fff]
PM: hibernation: Registered nosave memory: [mem 0x8b5f9000-0x8b69efff]
PM: hibernation: Registered nosave memory: [mem 0x8b69f000-0x8baeafff]
PM: hibernation: Registered nosave memory: [mem 0x8baeb000-0x8c20dfff]
PM: hibernation: Registered nosave memory: [mem 0x8c20f000-0x8fffffff]
PM: hibernation: Registered nosave memory: [mem 0x90000000-0xdfffffff]
PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x90000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u524288
pcpu-alloc: s192512 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 994502
Policy zone: Normal
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 3718072K/4042292K available (14345K kernel code, 3477K rwdata, 5456K rodata, 2684K init, 5980K bss, 323960K reserved, 0K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x2d/0x430 with crng_init=1
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 48644 entries in 191 pages
ftrace: allocated 191 pages with 7 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20201113
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000008978a000 end: 0x000000897a9fff
DMAR: RMRR base: 0x0000008d800000 end: 0x0000008fffffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2caf46e03c8, max_idle_ns: 440795329092 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6199.99 BogoMIPS (lpj=12399996)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
SRBDS: Mitigation: Microcode
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 40K
smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1024
smpboot: CPU0: Intel(R) Core(TM) i3-8100T CPU @ 3.10GHz (family: 0x6, model: 0x9e, stepping: 0xb)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (24799.99 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x8b69f000-0x8baeafff] (4505600 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 13:02:18, date: 2021-08-20
NET: Registered protocol family 16
DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1629464538.036:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Kprobes globally optimized
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 9 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8A9F00B88200 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160527)
ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8A9F00D85000 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8A9F00B68000 000626 (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8A9F01040C00 00011B (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8A9F00B6F800 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8A9F00B69800 0005FC (v02 PmRef ApIst 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8A9F00D84400 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8A9F00BB9000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8A9F00D87000 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 8 GPEs in block 00 to 7F
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [DRST] (on)
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [PAUD] (on)
ACPI: Power Resource [SPR0] (off)
ACPI: Power Resource [V0PR] (on)
ACPI: Power Resource [V1PR] (on)
ACPI: Power Resource [V2PR] (on)
ACPI: Power Resource [PXTC] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: Power Resource [PIN] (off)
ACPI: Power Resource [SPR1] (off)
ACPI: Power Resource [SPR2] (off)
ACPI: Power Resource [SPR3] (off)
ACPI: Power Resource [SPR5] (off)
ACPI: Power Resource [ZPDR] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
pci 0000:00:00.0: [8086:3e1f] type 00 class 0x060000
pci 0000:00:02.0: [8086:3e91] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xa1000000-0xa1ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xa231e000-0xa231efff 64bit]
pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
pci 0000:00:12.0: reg 0x10: [mem 0xa231d000-0xa231dfff 64bit]
pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xa2300000-0xa230ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
pci 0000:00:14.2: reg 0x10: [mem 0xa2316000-0xa2317fff 64bit]
pci 0000:00:14.2: reg 0x18: [mem 0xa231c000-0xa231cfff 64bit]
pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xa231b000-0xa231bfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a352] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xa2314000-0xa2315fff]
pci 0000:00:17.0: reg 0x14: [mem 0xa231a000-0xa231a0ff]
pci 0000:00:17.0: reg 0x18: [io 0x4090-0x4097]
pci 0000:00:17.0: reg 0x1c: [io 0x4080-0x4083]
pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f]
pci 0000:00:17.0: reg 0x24: [mem 0xa2319000-0xa23197ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a33d] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
pci 0000:00:1c.6: [8086:a33e] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PTM enabled (root), 4ns granularity
pci 0000:00:1f.0: [8086:a308] type 00 class 0x060100
pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xa2310000-0xa2313fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xa2000000-0xa20fffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xa2318000-0xa23180ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 0x18: [mem 0xa2200000-0xa2200fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0xa0000000-0xa0003fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xa2200000-0xa22fffff]
pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xa00fffff 64bit pref]
pci 0000:02:00.0: [8086:3166] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xa2100000-0xa2101fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 02]
pci 0000:00:1c.6: bridge window [mem 0xa2100000-0xa21fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0x34
ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x84a38000-0x87ffffff]
e820: reserve RAM buffer [mem 0x84f32000-0x87ffffff]
e820: reserve RAM buffer [mem 0x87284000-0x87ffffff]
e820: reserve RAM buffer [mem 0x88bee000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8c20f000-0x8fffffff]
e820: reserve RAM buffer [mem 0x16e000000-0x16fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x1800-0x18fe] could not be reserved
system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x2000-0x20fe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfd6e0000-0xfd6effff] has been reserved
system 00:08: [mem 0xfd6d0000-0xfd6dffff] has been reserved
system 00:08: [mem 0xfd6b0000-0xfd6bffff] has been reserved
system 00:08: [mem 0xfd6a0000-0xfd6affff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
TCP: Hash tables configured (established 32768 bind 32768)
MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xa2200000-0xa22fffff]
pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xa00fffff 64bit pref]
pci 0000:00:1c.6: PCI bridge to [bus 02]
pci 0000:00:1c.6: bridge window [mem 0xa2100000-0xa21fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff window]
pci_bus 0000:00: resource 8 [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xa2200000-0xa22fffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xa00fffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xa2100000-0xa21fffff]
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 51788K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x000000007bd4c000-0x000000007fd4c000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=20 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.33)
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
io scheduler mq-deadline registered
pcieport 0000:00:1c.0: AER: enabled with IRQ 122
pcieport 0000:00:1c.0: DPC: enabled with IRQ 122
pcieport 0000:00:1c.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
pcieport 0000:00:1c.6: AER: enabled with IRQ 123
pcieport 0000:00:1c.6: DPC: enabled with IRQ 123
pcieport 0000:00:1c.6: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0x90000000, using 8100k, total 8100k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.5.1 model 0x9E
intel_idle: Local APIC timer is reliable in all C-states
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1024
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: setting system clock to 2021-08-20T13:02:19 UTC (1629464539)
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
intel_pstate: Disabling energy efficiency optimization
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
intel_pmc_core INT33A1:00: initialized
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x906eb, pf=0x2, revision=0xea
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (604743271, 767416)->(612703498, -7192811)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 69c2f4d1719c6e601fe8039a6c5d3206d1a8df75'
Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Lenovo UEFI CA 2014: 4b91a68732eaefdd2c8ffffc6b027ec3449e9c8f'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Trust - Lenovo Certificate: bc19ccf68446c18b4a08dce9b1cb4deb'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 1:854:28
RAS: Correctable Errors collector initialized.
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 2684K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image (text/rodata gap) memory: 2036K
Freeing unused kernel image (rodata/data gap) memory: 688K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
splash
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-5.11.0-27-generic
ahci 0000:00:17.0: version 3.0
r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
i801_smbus 0000:00:1f.4: SPD Write Disable is set
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.11.0-27-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.11.0-27-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb: port power management may be unreliable
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst
i2c i2c-0: 1/2 memory slots populated (from DMI)
libphy: r8169: probed
r8169 0000:01:00.0 eth0: RTL8168g/8111g, 9c:5a:44:8b:94:0f, XID 4c0, IRQ 126
r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
r8169 0000:01:00.0 enp1s0: renamed from eth0
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xa2319000 port 0xa2319100 irq 124
ata2: SATA max UDMA/133 abar m2048@0xa2319000 port 0xa2319180 irq 124
ata3: SATA max UDMA/133 abar m2048@0xa2319000 port 0xa2319200 irq 124
ata4: SATA max UDMA/133 abar m2048@0xa2319000 port 0xa2319280 irq 124
ata5: SATA max UDMA/133 abar m2048@0xa2319000 port 0xa2319300 irq 124
ata6: SATA max UDMA/133 abar m2048@0xa2319000 port 0xa2319380 irq 124
usb 1-1: new low-speed USB device number 2 using xhci_hcd
ata5: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
tsc: Refined TSC clocksource calibration: 3095.992 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2ca07d9d2e1, max_idle_ns: 440795236708 ns
clocksource: Switched to clocksource tsc
usb 1-1: New USB device found, idVendor=046d, idProduct=c05b, bcdDevice=54.00
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB Optical Mouse
usb 1-1: Manufacturer: Logitech
usb 1-2: new high-speed USB device number 3 using xhci_hcd
usb 1-2: New USB device found, idVendor=0dd4, idProduct=0200, bcdDevice= 1.16
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: KUBE II SCAN
usb 1-2: Manufacturer: CUSTOM Engineering S.p.A.
usb 1-2: SerialNumber: KUBE II SCAN Num.: 0
usb 1-3: new low-speed USB device number 4 using xhci_hcd
usb 1-3: New USB device found, idVendor=1c4f, idProduct=0040, bcdDevice= 1.20
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: USB Keyboard
usb 1-3: Manufacturer: SIGMACH1P
ata1.00: ATA-10: ST500LM034-2GH17A, LXM3, max UDMA/100
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
usb 1-7: new high-speed USB device number 5 using xhci_hcd
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST500LM034-2GH17 LXM3 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
usb 1-7: New USB device found, idVendor=174f, idProduct=2425, bcdDevice= 2.16
usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-7: Product: Integrated Camera
usb 1-7: Manufacturer: 180531246629
usb 1-7: SerialNumber: 200901010001
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-8: new high-speed USB device number 6 using xhci_hcd
usb 1-8: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-8: Product: USB2.0-CRW
usb 1-8: Manufacturer: Generic
usb 1-8: SerialNumber: 20100201396000000
usb 1-9: new full-speed USB device number 7 using xhci_hcd
usb 1-9: New USB device found, idVendor=1fd2, idProduct=6101, bcdDevice= 5.01
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-9: Product: LGD AIT Touch Controller
usb 1-9: Manufacturer: Melfas
usb 1-10: new full-speed USB device number 8 using xhci_hcd
usb 1-10: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver rtsx_usb
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C05B.0001/input/input4
hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
input: SIGMACH1P USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:1C4F:0040.0002/input/input5
hid-generic 0003:1C4F:0040.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACH1P USB Keyboard] on usb-0000:00:14.0-3/input0
input: SIGMACH1P USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:1C4F:0040.0003/input/input6
input: SIGMACH1P USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:1C4F:0040.0003/input/input7
hid-generic 0003:1C4F:0040.0003: input,hidraw2: USB HID v1.10 Device [SIGMACH1P USB Keyboard] on usb-0000:00:14.0-3/input1
input: Melfas LGD AIT Touch Controller Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:1FD2:6101.0004/input/input8
hid-generic 0003:1FD2:6101.0004: input,hiddev0,hidraw3: USB HID v2.00 Device [Melfas LGD AIT Touch Controller] on usb-0000:00:14.0-9/input0
hid-generic 0003:1FD2:6101.0005: hiddev1,hidraw4: USB HID v1.00 Device [Melfas LGD AIT Touch Controller] on usb-0000:00:14.0-9/input1
fbcon: Taking over console
Console: switching to colour frame buffer device 240x67
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.11 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Uncomplicated firewall.
systemd[1]: Finished Set the console keyboard layout.
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro. Quota mode: none.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Activating swap /swapfile...
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: Started Journal Service.
systemd-journald[271]: Received client request to flush runtime journal.
Adding 33554428k swap on /swapfile. Priority:-2 extents:37 across:37715964k FS
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
loop0: detected capacity change from 0 to 113544
loop1: detected capacity change from 0 to 113536
loop2: detected capacity change from 0 to 448496
loop3: detected capacity change from 0 to 448512
loop4: detected capacity change from 0 to 132648
loop5: detected capacity change from 0 to 133320
loop6: detected capacity change from 0 to 104360
loop7: detected capacity change from 0 to 104536
loop8: detected capacity change from 0 to 63664
loop9: detected capacity change from 0 to 66144
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
EDAC ie31200: No ECC support
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usblp 1-2:1.0: usblp2: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x0DD4 pid 0x0200
usbcore: registered new interface driver usblp
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
input: Melfas LGD AIT Touch Controller as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:1FD2:6101.0004/input/input9
hid-multitouch 0003:1FD2:6101.0004: input,hiddev0,hidraw3: USB HID v2.00 Device [Melfas LGD AIT Touch Controller] on usb-0000:00:14.0-9/input0
pstore: Using crash dump compression: deflate
pstore: Registered efi as persistent store backend
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
checking generic (90000000 7e9000) vs hw (a1000000 1000000)
checking generic (90000000 7e9000) vs hw (90000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
fbcon: i915drmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
usbcore: registered new interface driver btusb
Bluetooth: hci0: read Intel version: 370810011003110e32
Bluetooth: hci0: Intel device is already patched. patch num: 32
i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
mc: Linux media interface: v0.10
Intel(R) Wireless WiFi driver for Linux
iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
videodev: Linux video capture interface: v2.00
iwlwifi 0000:02:00.0: Found debug destination: EXTERNAL_DRAM
iwlwifi 0000:02:00.0: Found debug configuration: 0
iwlwifi 0000:02:00.0: loaded firmware version 29.1654887522.0 7265D-29.ucode op_mode iwlmvm
uvcvideo: Found UVC 1.00 device Integrated Camera (174f:2425)
input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:02:00.0: Allocated 0x00400000 bytes for firmware monitor.
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
iwlwifi 0000:02:00.0: base HW address: 58:a0:23:44:fd:95
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone3: failed to read out thermal zone (-61)
iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC274: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
audit: type=1400 audit(1629464562.027:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=577 comm="apparmor_parser"
audit: type=1400 audit(1629464562.027:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=577 comm="apparmor_parser"
audit: type=1400 audit(1629464562.087:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=576 comm="apparmor_parser"
audit: type=1400 audit(1629464562.087:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=575 comm="apparmor_parser"
audit: type=1400 audit(1629464562.131:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=578 comm="apparmor_parser"
audit: type=1400 audit(1629464562.131:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=578 comm="apparmor_parser"
audit: type=1400 audit(1629464562.131:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=578 comm="apparmor_parser"
audit: type=1400 audit(1629464562.139:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=579 comm="apparmor_parser"
audit: type=1400 audit(1629464562.195:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=583 comm="apparmor_parser"
audit: type=1400 audit(1629464562.323:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=582 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
process '/usr/bin/anydesk' started with executable stack
NET: Registered protocol family 38
usblp2: removed
usblp 1-2:1.0: usblp2: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x0DD4 pid 0x0200
kauditd_printk_skb: 27 callbacks suppressed
audit: type=1400 audit(1629464572.151:39): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=735 comm="cups-browsed" capability=23 capname="sys_nice"
Generic FE-GE Realtek PHY r8169-100:00: attached PHY driver (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
r8169 0000:01:00.0 enp1s0: Link is Down
iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring
r8169 0000:01:00.0 enp1s0: Link is Up - 1Gbps/Full - flow control rx
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
loop10: detected capacity change from 0 to 8
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler disabled
perf: interrupt took too long (2529 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
perf: interrupt took too long (3173 > 3161), lowering kernel.perf_event_max_sample_rate to 63000
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
audit: type=1400 audit(1629583337.157:40): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=49889 comm="cups-browsed" capability=23 capname="sys_nice"
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Multiple Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000041/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: [ 6] BadTLP
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
perf: interrupt took too long (3975 > 3966), lowering kernel.perf_event_max_sample_rate to 50250
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000040/00002000
pcieport 0000:00:1c.6: [ 6] BadTLP
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6
pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.6: device [8086:a33e] error status/mask=00000001/00002000
pcieport 0000:00:1c.6: [ 0] RxErr
Adding 33554428k swap on /swapfile. Priority:-2 extents:37 across:37715964k FS